USER MANUAL
PrestoAdvancedAD101_AD301_UG_000_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
M2M Design reserves the right to make any modification
37
Max Fragment Size
If you select UDP protocol whether in connect or wait mode you must specify
Max Fragment Size (default is 1300 bytes).
Renegotiate interval
Specify renegotiate interval if username/password is selected as authentication
method.
CA Certificate
Specify the CA Certificate.
Username
Specify the username.
Password
Specify the password.
Local Certificate
Specify the local certificate.
Local Private Key
Specify the local private key.
DH Group
Choose the DH Group from the following: 786 bits, 1024 bits, 1536 bits, 2048
bits.
Remote Host or IP
Address
Specify server IP address or hostname.
Redirect Gateway
This option allows usage of OpenVPN tunnel as a default route.
Tunnel Interface
Configuration
Pull tunnel interface configuration from server side.
Manual configuration
Local Interface IP
Address
Specify the IP address of the local VPN tunnel endpoint.
Remote Interface IP
Address
Specify the IP address of the remote VPN tunnel endpoint.
Pull from server
Network Topology
Specify topology of OpenVPN interfaces – NET30, P2P or SUBNET
Table 12 – OpenVPN parameters
Figure 16 – OpenVPN configuration page
