USER MANUAL
PrestoAdvancedAD101_AD301_UG_000_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
M2M Design reserves the right to make any modification
27
router#
no redistribute connected
Disable RIP update (optional):
router#
passive-interface eth0
router#
no passive-interface
eth0
Routing protocols use several timer that determine such variables as the frequency of routing
updates, the length of time before a route becomes invalid, an other parameters. You can adjust these timer
to tune routing protocol performance to better suit your internetwork needs. Use following command to
setup RIP timer:
router#
timers basic
[UPDATE-INTERVAL] [INVALID] [TIMEOUT] [GARBAGE-COLLECT]
router#
no timers basic
Configure interface for RIP protocol
router#
interface
greX
router#
ip rip send version
[VERSION]
router#
ip rip receive version
[VERSION]
Disable rip authentication at all interface.
Router(interface)#
no ip rip authentication mode
[md5|text]
Debug commands:
router#
debug rip
router#
debug rip events
router#
debug rip packet
router#
terminal monitor
