BT/SN/RAM 6000 Series
Hardware Guide
1-21
Product Overview
Revised 2015-07-16
Data Interface Specifications: Serial, Ethernet & USB
RESET Button Functions
Mode
Pattern
Description
Hard Reset
Press and hold for less than 3 seconds
Standard Reboot
Factory Restore
Press and hold between 3 and 10 seconds
RS232 LED flashes quickly
This option is implemented in SN version 3.09 and
higher. To restore default settings for older ver-
sions, rerun the SN Reflashing procedure found at
www.redlion.net
FW Upgrade
Press and hold between 10 and 15 seconds
WAN LED flashes quickly
Puts the modem in advanced firmware upgrade
mode by restarting the modem and running the
bootloader only. Do not use this mode unless
instructed to by Red Lion Technical Support.
USB Pass-Through
Press and hold for longer than 15 seconds
Signal LED flashes quickly
Puts the modem in main pass-through mode to the
RF module, allowing CCT provisioning and PST sup-
port. Do not use this mode unless instructed to by
Red Lion Technical Support.
