M NovAseptic GMP, Installation And User Manual

Page: 5 / 32

Operator and Equipment Safety
• All installers and operators of the equipment must read and understand this
installation and user manual before using this equipment. Failure to follow
installation and operating instructions could result in operator injury or damage to
the equipment.
• Any attempt to use the NovAseptic
®
GMP Mixer equipment in a manner not specified
in this manual may result in damage to the equipment, voiding of product warranty,
and possible operator injury.
• Any of the following can damage the mixer: external load; reaction forces and
torque; corrosion, erosion, and fatigue; and decomposing of unstable liquids.
• Prior to operation, the equipment must be fully assembled according to the
instructions in this manual.
• Use appropriate personal protective equipment and eye protection when operating the
equipment.
• Protect drive unit against dust.
• Electric engine may cause sparks. Do not use near flammable liquids or gasses.
• The drive unit may be heavy. Use appropriate equipment to avoid injury.
• Do not install components close to rotating parts of the GMP Mixer.
• During mixing operations, mixer parts may become hot to the touch.
• Do not insert fingers into equipment; pinching may occur.
• The GMP Mixer is not classified for ATEX. Contact your local representative for
ATEX options
• Check the magnetic parts of the GMP Mixer regularly for foreign materials.
• Do not run with an empty vessel.
• Check that all components in the mixer are of correct size.
• Handle the mixing head and male bearing with care; bearing material is hard and
brittle.
• Keep electrically controlled medical devices and magnetically stored media away
from magnetic parts of the GMP mixer.
• The mixing head must be completely submerged during operation to ensure sufficient
lubrication.
• The system must be properly grounded.
!
NovAseptic
®
GMP Mixer Installation and User Guide 5