MT-500
33
INT
CH NAME
SHIP-SHIP
PUSH ENTER
TO CHANGE.
CH NAME Screen
•
Push the
SELECT/ENT
knob. The underline cursor appears at the first
character position.
•
Use the
SELECT/ENT
knob to move the underline cursor to the character
position needing change.
•
Push the
SELECT/ENT
knob or
ENT
key. The blinking cursor appears.
•
Use the
SELECT/ENT
knob or microphone keys to change the contents of
the character to the new value.
•
When the new value is correct, push the
SELECT/ENT
knob or
ENT
key.
•
Up to eleven characters are allowed in the channel name. If more charac-
ters need changing, push the
SELECT/ENT
knob or
ENT
or
EXIT
key to
move the cursor to the next desired character. If no more changes are
desired, push the
SELECT/ENT
knob or
ENT
key to advance the cursor to
the last character.
•
When the last character is selected, push the
SELECT/ENT
knob or
ENT
key.
•
STORED OK
appears briefly in the lower line of the display completing
the entry.
•
Press the
16
key to return to the Main display.
Summary of Contents for MT-500
Page 56: ...MT 500 55 9 3 Troubleshooting...
Page 62: ...MT 500 61 Table 1 of 2...
Page 63: ...62 MT 500 Table 2 of 2...
