20
MT-500
Memory Scan
Memory Scan allows the user to create and scan a bank of preferred channels.
Channels may be added to or removed from the memory channel bank as
desired. Memory channels are stored individually and may be deleted indi-
vidually, or the entire bank may be deleted. If the
PTT
button is pressed, the
transceiver exits scanning and normal communication is resumed.
To create or add channels to the memory channel bank:
•
Press the
MEM
key. The Memory Scan channel bank appears in lower
two lines of the display. If no channels have been previously added to the
bank, the Primary Calling Channel (16) is displayed. Otherwise, up to six
channel numbers appear. A plus sign (+) at the end of the lower line
indicates more than six channels are stored in the bank. Press the
MEM
key again to advance to the next page of channels. The memory channel
bank can hold all usable voice communication channels.
INT
INT
INT
Memory Scan Bank
Memory Scan Bank
Memory Scan Bank
Default Page
Page Full
Next Page
•
Rotate the
SELECT
knob or microphone keys to select a desired channel
to add to the memory channel bank.
•
Press and hold the
MEM
key for about two seconds. The selected chan-
nel is stored and the channel number appears in the memory channel
bank. Repeat the select and store process to add more preferred channels.
As each channel is added, the existing channels in the bank shift as nec-
essary to display the new channel number in the bank.
When in the normal communication mode, as channels are selected,
MEM
CHANNEL
appears in the second line of the display if the selected chan-
nel is stored as a memory channel.
INT
16 PRI. HI
MEM CHANNEL
N 28 04.814
W 83 42.169
Memory Channel Display
To remove channels from the memory channel bank:
Summary of Contents for MT-500
Page 56: ...MT 500 55 9 3 Troubleshooting...
Page 62: ...MT 500 61 Table 1 of 2...
Page 63: ...62 MT 500 Table 2 of 2...
