M-tech MT-500, Owner'S Handbook Manual

Page: 26 / 64

MT-500 25
• Push the SELECT/ENT knob. The DIRECTORY NAME/ID screen appears
presenting the name and MMSID for the selected directory entry. The
blinking cursor is positioned at the start of the entry’s name.
• Push the
SELECT/ENT
knob or
ENT
key. The cursor becomes an under-
line instead of a blinking square and moves to the first character position.
• Use the
SELECT/ENT
knob to move the underline cursor to the character
position needing change.
• Push the
SELECT/ENT
knob or
ENT
key. The blinking cursor appears.
• Use the
SELECT/ENT
knob or microphone keys to change the contents of
the character to the new value.
• When new value is correct, press the
SELECT/ENT
knob or the
ENT
key.
If more characters in the same line need changing, use the SELECT/ENT
knob or
ENT
or
EXIT
key to move the blinking cursor to the next desired
character. If no more changes are desired on the same line, press and hold
the
CALL
key to move the cursor back to the start of the line.
• When both the name and MMSID are correct, press and hold the
CALL
key to save the data and exit to the directory listing.
LAMP
Allows adjustment of illumination for the LCD display, keypad and micro-
phone keypad.
• Press and hold the
CALL
key. Menu topics appear in the display.
• Use the SELECT/ENT knob to position the cursor on the LAMP topic.
• Push the SELECT/ENT knob. The BRIGHTNESS adjust screen appears
in the display.
USA INT
BRIGHTNESS
LO HI
Brightness Control
• Use the SELECT/ENT knob or microphone keys 0~3 to change the set-
ting.