l (EU) - 2(PL) - 3(DJ - 4(EC) - 5(U) -
T
!
4. Similarly. when the [ON] switch is pressed. Configuration code
is
changed as follows.
1 (EU) +- 2(PLJ +- 3(DJ +- 4(EC) +- S(U) +
!
t
5. When you choose Configuration that wants to be used, press the [F] switch for one
second.
- The new Configuration is decided. The Configuration code indication and"
F "
icon stop blinking, and the Configuration code indication is maintained until the
power of this transceiver turned off once.
F
Ex.) Choosing the
PL
Configuration
6. When press the
[Fl
switch momentarily while the Configuration code indication and
II
F "
icon are lighting and not blinking.
- It goes Configuration select state again.
"F"
icon and present Configuration
code on Channel Indicator will blink:.
7. Tum off the power of this 1ransceiver once while
II
f
II
icon and the Configuration
code indication are not blinking. And then tum on the power again while the [Fl
switch is not pressed.
- It changes to new Configuration. and it enters a normal state of receiving and
transmitting.
* While Configuration select mode, all other indicator disappears except for "
F "
icon and Channel Indicator.
* While Configuration select mode, it is in mute state, and normal operation of the
reception and the fransmission cannot be done.
* The selected Configuration code will appear on Channel Indicator while Configu
ration select mode.
* When
[UP]/[DNJ
switch is pressed and held for 500msec While Configuration select
mode, Auto Repeat function is activated. and the unit will automatically increment
or decrement the Configuration code in 200msec speed While pressing.
P.11
