- Press and hold the (PTI] swHch.
"TX"
Icon tums on.
- Hold the microphone about 2 lnches away from your mouth and speak In a normal
voice.
- Release the swffch to lls1en for a r esponse.
•TX"
icon turns
off.
* When power on is done when [PTI] switch is being pressed, then transmit is not
possible.
8.12 Priority CH9 /CH 19 Mode (Channel Mode)
The Channel Mode has 3 states of Nonna! Mode and Priority CH9/CH19 Mode, by
using [9/19] switch on the microphone.
- Push the (9/19) swffch; the
radio
automcrtfcally tunes
to
channel 9. (Priority CH9
Mode)
- Push the (9/19] swttch again: the radio automaHcally tunes
to
channel 19. (Priority
CH19Mode)
- Push the (9/19) switch once again: return to the previous channel. (Normal Mode)
* The AM/FM modulation mode of Priority CH9/CH19 Mode is selected by (AM
I
FM]
slide switch.
* When [UP]/[DN) switch is pressed during Priority CH9/CH19 Mode, Priority
CH9 /CH 19 Mode is released at present Priority channel and these operations are
accepted.
* When other switch except for [UP]/(DN] switch are operated during Priority
CH9/CH19 Mode, this mode is maintained and these operations are done.
8.13 Configuration select mode operation [Only for Multi Configuration mode]
1.
Tum off the power of this transceiver.
2.
Tum on this transceiver's power while [F] switch is being pressed.
- It goes Configuration select mode. At this mode, " f '' icon will blink: and present
Configuration code on Channel Indicator will blink.
Configuration Select Mode
3.
At this state, when the [UP] switch is pressed, Configuration code is changed as
follows.
P.10
