14
E-33 Rectifier Operating Manual
entered by playing a sound highlight best
described as a rumbling sound. You may
have to go through the entire FYS
sequence several times before you clearly
identify this sound. After the rumbling
highlight is played, the freight yard sounds
heard in Event 1 will continue to play.
Event 3:
Interrupt the transformer
throttle again to cycle the engine from
reverse back to neutral. FYS confirms that
the engine is now in neutral by sounding
two quick air releases. This is followed
approximately two seconds later by a man
whistling and continued freight yard
loading and unloading sounds.
Event 4:
Interrupt the transformer throttle
again to complete the FYS feature and cycle the engine into forward. FYS
confirms it has entered forward by playing the sound of the freight car door
closing. Within two seconds, the whistle will sound two short blasts (three
if entering reverse), and the bell will begin to chime. After a few chimes of
the bell, the engine will begin moving in forward with the bell continuing to
ring. A few seconds later, the bell will turn off, and the engine will resume
normal operation.
Note: When entering Event 4, it is important to set the
transformer throttle at a high enough
setting that the engine will begin to move
when the motors are activated. However,
the throttle should not be too high for the
engine to maintain a safe operating speed.
Listen For Engine
Rumbling Sound
Interrupt Throttle To
Enter The Next Phase
Listen For 2
Air Release Sounds
Interrupt Throttle To
Enter The Next Phase
Listen For The Sound
“All Aboard!”
Interrupt Throttle To
Enter The Next Phase
