background image

2

E-33 Rectifier Operating Manual

Table Of Contents

QUICK START - BASIC OPERATION

3

PROTO-SOUND® 

OPERATING INSTRUCTIONS

4

DCRU® Reverse Unit Operation(All 3-Rail Models)

5

Whistle Operation

5

Bell Operation

5

Proto-Coupler®  Operation

6

Squeaking Brake Sounds

7

Tips On Using Squeaking Brakes

8

Self-Charging Battery Backup System

8

Freight Yard Sounds (FYS)

10

Tips On Using The Passenger Station Sounds

15

Reverse Unit Lockout Control Functions

16

Locking The Engine Into Forward or Reverse

16

Unlocking The Engine

16

Locking The Engine Into Neutral

16

Proto-Sound® Volume Adjustment

17

USING “RESET" TO PROGRAM PROTO-SOUNDS®

18

Setting The Engine Volume

19

Programming For Squeaking Brake Operation

19

Programming For Whistle In Neutral Operation

20

Programming For Proto-Coupler® Operation

20 

Programming For Cab Chatter Sounds

21

Programming For FYS Operation

21

Activating Remote Lock-Out Control

22

Resetting All Proto-Sound® Options To Factory Defaults

22

OIL & LUBRICATION INSTRUCTIONS

23

TRACTION TIRE REPLACEMENT INSTRUCTIONS

24

LIGHT BULB REMOVAL & REPLACEMENT 

26

TROUBLE SHOOTING 

Proto-Sound®

 PROBLEMS

27

Proto-Sound® RESET Feature Chart

30

Transformer Wiring Chart

31

O-31 OPERATION

32

SERVICE AND WARRANTY INFORMATION

36

HOW TO GET SERVICE 

36

LIMITED ONE YEAR WARRANTY

36

WARNING:

  When using electrical products, basic safety precautions should be followed including the
following:
--  Read this and all related manuals (transformer/power supply, locomotive, etc.) thoroughly
before using this device.

--  This device is not recommended for children under 8 years of age without adult supervision.
--  MTH recommends parents examine the toy transformer used to power this device periodically
for conditions that may result in the risk of fire, electric shock, or injury to persons, such as
damage to the primary or output cord, plug blades, housing or other parts (including proper
functioning of the circuit breaker), and that, in an event such conditions exist, the transformer
should not be used until properly repaired.

Summary of Contents for Premier E33 Electric Engine





































Reviews: