background image

Pr Articulated Camelback Steam Locomotive

            25

Service & Warranty Information

Limited One-Year Warranty

How to Get Service Under the Terms of the Limited One-Year Warranty

For warranty repair, follow the instructions below to obtain warranty service.

First, e-mail, write, call or fax an Authorized M.T.H. Service Center in your area or M.T.H. Electric Trains to obtain Repair 
Authorization.  You can find the list of Authorized Service Centers on the M.T.H. website, www.mth-railking.com.  Authorized 

Service Centers are required only to make warranty repairs on items sold from that store; all other repairs may or may not be done 
at the store's own discretion.  Otherwise, contact M.T.H. (fill out the Service Contact form in the  Service Section of www.mth-

railking.com; send US mail to the address listed below; tel: 410-381-2580;  fax: 410-423-0009), stating when the item was 
purchased and describing the problem.  If you contact M.T.H., you will be given a return authorizat ion number to assure that your 
merchandise will be properly handled upon its receipt.

CAUTION:  Make sure the product is packed in its original factory packaging including its foam and plastic wrapping material so 
as to prevent damage to the merchandise.  The shipment must be prepaid and we recommend that it be insured. 

lease make sure you have followed the instructions carefully before returning any merchandise for service.

 

See our website at  or call 1-888-640-3700 to identify an Authorized M.T.H. Train Merchant near you.  

M.T.H. products are warrantied for one year from the date of purchase against defects in material or workmanship, excluding wear 

items such as light bulbs, pick-up rollers, batteries, smoke unit wicks, and traction tires.  We will repair or replace (at our option) 
the defective part without charge for the parts or labor, if the item is returned to an Authorized M.T.H. Service Center or M.T.H. 

Electric Trains within one year of the original date of purchase. This warranty does not cover damages caused by improper care, 
handling, or use.  Transportation costs incurred by the customer are not covered under this warranty.

Items sent for repair must be accompanied by a return authorization number, a description of the problem, and 

, which gives the date of purchase.  If you are sending the 

item to M.T.H., fill out the Service Contact form in the Service Section of www.mth-railking.com; send US mail to the address 
listed below; call 410-381-2580, or fax 410-423-0009 to obtain a return authorization number.  If you are sending this product to an 
Authorized Service Center, contact that Center for their return authorization.

This warranty gives you specific legal rights, and you may have other rights that vary from state t o state.

Service Department

M.T.H. Electric Trains

7020 Columbia Gateway Drive
Columbia MD  21046-1532

A cover letter 

including your name, address, daytime phone number, e-mail address (if available), Return Authorization number, a copy of 
your sales receipt and a full description of the problem must be included to facilitate the repairs.  Please include the description 
regardless of whether you discussed the problem with a service technician when contacting the Service Center or M.T.H. for 
your Return Authorization.

P

All M.T.H. products purchased from an Authorized M.T.H. Train Merchant are covered by this warranty.

a copy of the 

original sales receipt from an Authorized M.T.H. Train Merchant

www.mth-railking.com

Summary of Contents for Premier 0-8-8-0






























Reviews: