P. 51 / 68
920MHz Band Wireless Device (Korea) USERS MANUAL EM-9121 Rev. 1
6.3 TERMINATING MEASUREMENT TOOL
Terminate the measurement tool (channel noise scan or communication test) according to the following procedure.
1) Click [Close] button in the “COM port” column on the channel noise scan or communication test (Sender or Receiver) screen and
confirm that [x] button in the upper right corner is activated.
Click [x], then click [OK].
Terminate the communication test for both sender and receiver.
Figure 6.36 Terminating measurement tool
2) When the mode selection screen appears, check ‘Normal mode’.
Figure 6.37 ‘Communication test mode (Receiver)’ selected
