P. 46 / 68
920MHz Band Wireless Device (Korea) USERS MANUAL EM-9121 Rev. 1
5) When “Omit password” is set to ‘No’ on “Environment setup” screen, the password is required to connect to the wireless device.
Enter the password and click [Connect].
Figure 6.28 Password entry
6) When the following message appears, click [OK].
Figure 6.29 Confirming communication test (receiver) startup
7) Turn off the power of the device and reboot it.
8) Check ‘Communication test mode (Receiver)’ and click [Launch tool].
Figure 6.30 Starting communication test (Receiver)