R3Y-RS8
P. 3 / 3
EM-8959 Rev.2
M-SYSTEM WARRANTY
M-System warrants such new M-System product which it manufactures to be free from defects in materials and workmanship during the 36-month period following the date that such
product was originally purchased if such product has been used under normal operating conditions and properly maintained, M-System's sole liability, and purchaser's exclusive remedies,
under this warranty are, at M-System's option, the repair, replacement or refund of the purchase price of any M-System product which is defective under the terms of this warranty. To
submit a claim under this warranty, the purchaser must return, at its expense, the defective M-System product to the below address together with a copy of its original sales invoice.
THIS IS THE ONLY WARRANTY APPLICABLE TO M-SYSTEM PRODUCT AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. M-SYSTEM SHALL HAVE NO LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES OF ANY KIND WHATSOEVER.
M-System Co., Ltd., 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN, Phone: (06) 6659-8201, Fax: (06) 6659-8510, E-mail: [email protected]
BUS CONNECTOR
INTERNAL POWER
BUS A
BUS B
*
INPUT 1
19B
18B
A
B
B
RTD
16B
INPUT 2
15B
14B
A
B
B
RTD
13B
INPUT 3
11B
10B
A
B
B
RTD
9B
INPUT 4
7B
6B
A
B
B
RTD
5B
INPUT 5
19A
18A
A
B
B
RTD
17A
INPUT 6
15A
14A
A
B
B
RTD
13A
INPUT 7
11A
10A
A
B
B
RTD
9A
INPUT 8
7A
6A
A
B
B
RTD
5A
*
For dual redundant communication.
■
CONNECTION DIAGRAM
PIN NO.
ASSIGNMENT
PIN NO.
ASSIGNMENT
1A
NC
1B
NC
2A
NC
2B
NC
3A
NC
3B
NC
4A
NC
4B
NC
5A
IN8B
5B
IN4B
6A
IN8B
6B
IN4B
7A
IN8A
7B
IN4A
8A
NC
8B
NC
9A
IN7B
9B
IN3B
10A
IN7B
10B
IN3B
11A
IN7A
11B
IN3A
12A
NC
12B
NC
13A
IN6B
13B
IN2B
14A
IN6B
14B
IN2B
15A
IN6A
15B
IN2A
16A
NC
16B
NC
17A
IN5B
17B
IN1B
18A
IN5B
18B
IN1B
19A
IN5A
19B
IN1A
20A
NC
20B
NC
■
INPUT CONNECTOR (40-pin)
• Unused Input Channels
Close across the unused input terminals with a resistor as
shown below and set the DIP switch for an RTD. The
resistance value must match the RTD type (100
Ω
for Pt
100, 50
Ω
for Pt 50).
Unused channels left open are equal to the burnout, which
turns the red ERR LED on and sets a burnout flag at the
PLC or the host device.
Unused channelscan be specified and set so on the PC
Configurator Software (model: R3CON) without needing to
connect resistors at the field terminals.
19B
18B
INPUT 1
15B
14B
INPUT 2
11B
10B
INPUT 3
7B
6B
17B
13B
9B
5B
INPUT 4
19A
18A
17A
INPUT 5
15A
14A
13A
INPUT 6
11A
10A
9A
INPUT 7
7A
6A
5A
INPUT 8