Button
Internal call and
communication
Power Lamp
To check power and operating status:
ON : Power ON /
Communication Connected
OFF : Power OFF
Flicker : Call ringing
■
Name of Each Part
EXPANSION DOOR PHONE(KDP-602GD)
1.
As this device consists of precise electronic components, and high
voltage is generated internally, do not attempt to disassemble.
2.
Do not drop lndoor or outdoor station, and avoid strong impact.
3.
When cleaning, never use wet hands, volatile benzene or paint thinner.
4.
Keep away from humidifier and stove. High temperature and humidity
can cause malfunction
5.
Maintain the product clear by frequently cleaning doorstation with
soft cloths
6. This product is doorphone which works with Lobbyphone model
KLP-C420 / C420R and Repeater KVS-A4P/A8P.
7. Recommed to use an external DC adaptor provided by kocom,
if not, this may cause bad quality of audio.
Precautions for Operation
!
Button
Door opens when this
button is pressed.
Available only for the
door equipped with
door opener.
Volume
control
To control calling
signal volume.
Description
KDP-602GD
Electric source
DC 13±1V only (External DC 15V adadptor)
Power Consumption
In Load 2.5W
Sound
Electronic chime
Wiring
4 Wired in polarity
Vcc / GND / Audio / +13V
From KVS-A4P/A8P to the last KDP-602GD,
max. 80M using CAT5 single cable, and
150M using CAT5 pair cables.
"From KLP-C420 / C420R to the last KDP-602GD,"
max. 150M using CAT5 single cable,
and max. 300M using CAT5 pair cables.
Cable Specs.
and max. distance
■
Specifications
■
How to operation
DOORPHONE
KDP-602GD USER
’
S MANUAL
1. Communcation with lobbyphone (KLP-C420 / C420R)
2. Internal call and communication
(1) A visitor makes a call to the house.
(2) The doorphone rings.
(3) Pick up the handset to start communication with visitor.
(4) When communicacation ends, hang up the handset.
(1) Pick up the handset and press button on the doorphone.
(2) The extended monitor or doorphone is ringing.
(3) Then, when the handset of the extended doorphone is picked up,
the internal communication starts.
(4) When communicacation ends, hang up the handset.
3. Door open
When the door open button is pressed during the communication
between the lobbyphone and the doorphone, door opens.
A- Choose a place on the wall where you want to hang the
DOOR PHONE.
B- Fasten the wall hanger on the wall.
C- DOOR PHONE can be hung on the wall hanger easily now.
■
Installation
N0530
KDP-602GD
·Doorphone
·Wall hanger Pannel
■
Component
·Install wire
·Screw
3×12mm (2ea)
