MRP10
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-4889 P. 6 / 13
OPERATION
■
CCW. and CW.
Operation
Input Signal
Output Signal
Output Stem
Position
Output Stem
Angle
Indicator Symbol
Output Stem Rotation
(View from the top of the cover)
CCW.
4 mA DC
4 mA DC
Full-shut
0°
S
CW.
20 mA DC
20 mA DC
Full-open
90°
O
CCW.
CW.
4 mA DC
4 mA DC
Full-open
90°
O
CCW.
20 mA DC
20 mA DC
Full-shut
0°
S
CW.
Approx. 93° (max.)
90°
Mechanical
Stopper
Mechanical
Stopper
Approx. 1.5°
Approx. 1.5°
Full-open position
Input: 20mA DC
90°, OPEN
(fuctory setting)
Full-close position
Input
：
4mA DC
0°, SHUT
HOW TO USE MANUAL OPERATION BUTTON
• Operation angle can be adjusted by the UP/CCW / DOWN/CW button.
Turn SW-8 from OFF to ON to enable manual operation (If SW-8 is kept OFF, control by input signal takes priority over
Manual operation).
Adjust the position of the output stem by UP/CCW / DOWN/CW button.
Perform the following procedure after position adjustment.
<After completion of full-close position adjustment>
Turn SW1-5 OFF -> ON -> OFF to set full-close position newly.
<After completion of full-open position adjustment>
Turn SW1-6 OFF -> ON -> OFF to set full-open position newly.
PC CONFIGURATOR SOFTWARE (MODEL: STCFG)
The PC configurator software helps the user to configure various parameters and to monitor operation status of the actuator.
Download the STCFG from “Download” on the M-System’s web site https://www.m-system.co.jp
Prepare the PC and the USB Type-C cable separately.
For details, refer to STCFG users manual.
