14
EK 4
English
3.4 - HOW TO INSTALL THE FILTERING TYPE
A -
HOW TO POSITION THE HOOD CASING
- Assemble the reduction connection using the two M 99 x 99screws included in the
supply.
- Assemble the activated carbon filters (if not already assembled).
- Drill a 260 x 495 m/m slot on the lower part of the casing.
- On the upper part of the casing drill a hole or slot with the same dimensions of the
reduction connection for the recycling air exhaust.
- A grid must protect the hole or slot in order to prevent foreign bodies from getting into
the casing.
- Anchor the hood to the casing by means of the eight M 99 x 99 screws included in the
supply.
- Fix the filter holding grid by means of the two brass screws.
