![background image](http://html.mh-extra.com/html/m-system/73vr21-series/73vr21-series_user-manual_683636016.webp)
16
73VR21BLD USERS MANUAL EM-7395-C Rev.7
2.7 INPUT PEN SETTING (INDIVIDUAL)
Pressing Input Pen Setting (Individual) button under Setting buttons opens the window shown in Figure 2.7.
Figure 2.7. Input pen setting (Individual).
2.7.1 COMMON SETTING
Enable / Disable
Enable / Disable the recording. The pen’s input data is stored when this selection is set to Enable.
Tag
Enter a desired tag name.
Tag name
Max. 8 characters
Unit
Enter a desired unit name.
Unit
Max. 4 characters
Color
Touching the current selection of the Color opens a color palette. Choose a desired color from the palette.
Line thickness
This setting is selectable even during recording.
Normal
Normal line (1 pixel)
Thick
Thick line (3 pixels)
Decimal place
Specify how many decimal places you want to show on the digital indicators and the scale. Choose among 0, 1, 2
and 3. For a temperature input, only 0 or 1 is selectable.
Plot range with decimal place on the scale
Plot range in an engineering unit can be indicated on the scale in Trend and Bargraph views. For example, when
the lower range is set to 0, and the upper range is set to 1000, the scale shows 10 divisions (0, 100, 200, ... 900,
1000). How many decimal places are to be shown depends upon the ‘Decimal place’ setting. For example, when ‘2’
decimals are selected, the scale shows two decimal places.
For horizontal chart, only 1 decimal place is possible.