54UC
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6489-B Rev.9 P. 11 / 47
■
SYSTEM OPERATIONS
System operations include switching the tariff or resetting energy counts, and rebooting.
RGTR.
PARAMETER
5329
Switch tariff
0 : High tariff (peak time) (*)
1 : Low tariff (off-peak time)
5330
Reset energy count
1 : Reset all values
2 : Reset all MAX / MIN values and set the present values.
3 : Reset all average (demand) values
0 : No resetting
Specify the extent of count resetting. The register is automatically set to ‘0’ when the resetting procedure is complete
after one of these values is written at this address. If another value is written before ‘0’ has been set, the former reset-
ting procedure ends indefinitely.
Specific values can be preset to each register by writing at this address from the host.
5331
Reboot system
Write ‘10001’ to reboot the system. (Any other values can be written but invalid.)
5332
Backup / restore setting
20002 : Backup the present setting
30003 : Restore the device with the backup setting data
The register is automatically set to ‘0’ when the procedure is complete after one of these values is written at this regis-
ter. If another value is written before ‘0’ has been set, the former procedure ends indefinitely.
5333
Passcode
0000 to 9999
0000 : Factory setting
Set and read out a passcode used to go into the Setting Mode using the front control buttons.
5334
CC-Link register writing protection passcode
Setting a passcode to control writing registers via CC-Link.
1 to 999 999 999
0 : Cancel writing protection (*)
The CC-Link passcode must be set to the register 4943 before setting ‘1’ or ‘2’ in the register 4945 to deactivate the
writing protection.
The value in this register is encrypted when it is read out. Only ‘0’ (Cancel protection) is read out as it is.
When a new code is set in this register, the register 4945 is immediately reset to ‘0’ so that a next command will be
already limited in access.
(*) Factory setting