48NAVA
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9442 Rev.8 P. 8 / 9
•
SET
•
M
Indicator OFF
Complete
•
SET
•
M
Indicator ON
Complete
LED ON
LED OFF
LED Blinking
Mode Selector
*
1
■
POWER SAVING MODE
*
1. Keep pressing at least for 3 seconds to activate Mode Selector M. Press briefly for second and more times within 1 minute after it has been activated.
*
2. Keep pressing DOWN button at least for 5 seconds to enter the simulated output mode.
*
3. Pressing UP or DOWN button simulates the output between 0 and 100%. The bargraph shows the simulated output.
*
4. Keep pressing SET button at least for 5 seconds to exit the simulated output mode.
Note: Each setting sequence is complete only when SET button is pressed. Once set, parameters are not lost even after the power is removed, except
for the power saving mode. The power saving mode is automatically canceled when the power is reset.
■
DC OUTPUT FINE ZERO/SPAN ADJUSTMENTS
LED Blinking
0% Output Adjustment
UP / DOWN Button
Z
M
Press at once
Z
Increase / Decrease
Complete
SET
Z
LED ON
100% Output Adjustment
S
M
Press at once
S
Increase / Decrease
Complete
SET
S
LED ON
Mode Selector
*
1
LED OFF
■
SIMULATED OUTPUT
Simulated Output
Increase / Decrease
*
3
Complete
SET
LED Blinking
DOWN Button
*
2
Z
S
LED OFF
Z
S
*
4
