48NAVA
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9442 Rev.8 P. 7 / 9
ADJUSTMENT PROCEDURE
L
SET
L
M
Increase / Decrease
L Setpoint
Complete
LL
SET
LL
M
Increase / Decrease
*
2
LL Setpoint
Complete
H
SET
H
M
Increase / Decrease
H Setpoint
Complete
HH
SET
HH
M
Increase / Decrease
*
2
HH Setpoint
Complete
LED OFF
LED OFF
LED Blinking
Mode Selector
*
1
UP / DOWN Button
LED Blinking
Mode Selector
*
1
■
ZERO ADJUSTMENT
: Apply 0% input signal before adjustment.
Z
SET
Z
M
Zero Adjustment
Complete
LED OFF
LED Blinking
Mode Selector
*
1
S
SET
S
M
Span Adjustment
Complete
■
SPAN ADJUSTMENT
: Apply 100% input signal before adjustment.
■
ALARM SETTING
: Proceed after the zero / span adjustments.
*
1. Keep pressing at least for 3 seconds to activate Mode Selector M. Press briefly for second and more times within 1 minute after it has been activated.
*
2. HH or LL setpoints are not provided for the 48NAVA-2.
Note: Each setting sequence is complete only when SET button is pressed. Once set, parameters are not lost even after the power is removed.
