47LPA
P. / 5
EM-955-B Rev.2
■
OPERATIONS IN MEASURING MODE
• Switching the main display to MAX or MIN values
Press Max/Min button to switch the main display to MAX or MIN values.
‘Max’ or ‘Min’ indicator turns on during the MAX/MIN display mode.
Press Max/Min button again for 1 second or more, or turn the power supply off and on to cancel the MAX/MIN display mode.
• Confirming alarm setpoints
Press Alarm/ button to confirm alarm setpoints.
■
OPERATIONS IN SETTING MODES
• Main display
The main display shows the current settings while the panel meter is in the setting mode.
• Shifting through setting parameters
In any setting mode, pressing Alarm/ button shifts one parameter to the next. Pressing Scale/ button shifts one to the
previous.
• Changing parameters
Pressing Shift button while one of the parameter settings is indicated on the display shifts the panel meter into the setting
standby mode. The digit to which you can apply changes starts blinking.
Press Up button to change the blinking value.
Press Shift button to go to the next digit.
Press Alarm/ or Scale/ button to apply the new value and go to the next or previous parameter setting.
• If you get lost...
Hold down Max/Min button for 1 second or more to return to the measuring mode without applying the last changes. (Those
which have been already applied by pressing Alarm/ or Scale/ button are not cancelled.)
Max. Value
Display
Min. Value
Display
Max/Min
button
Max/Min
button
Max/Min
button
ON
Measuring
Mode
Max
ON
Min
Alarm LL
Alarm L
Alarm/
button
Alarm/
button
Alarm/
button
Measuring
Mode
Alarm H
Alarm HH
Alarm/
button
Alarm/
button
