8
2.10
CHIMNEY
The design of the chimney must deal with strict conditions:
• The chimney must be insulated.
• One stack may have more than two changes of direction. The angle of this change of direction must be
greater than 30 ° - 45 ° from the vertical direction.
• Must be taken into consideration the existing barriers in the vicinity of the hole in the chimney.
• Do not connect more than one fireplace. Use unused seals.
All fireplaces are standard LUNA HC chimney diameter 200 mm. Some chimneys may require different
standard diameters. In this case, refer to the table for the height of the chimney and by reducing the possibility of
reduction. Chimney fireplace insert LUNA HC can connect from the top / Pic.9 /.
3
CONTROL - REGULATION
Regulation of inlet of air for fireplace „RD“ is controlled by regulation on the front bar /see pic.10/ by
using of key as you can see bellow /Pic.10/. This regulation influences inlet of primary and secondary air inside
the combustion chamber of fireplaces/Pic.11/. When the door of the fireplace is open, regulation cannot
influence burning.
Pic.9
max
min
Pic.10
secondary
Inlet of air
primary
Pic.11
