M Design Luna Diamond Series, Instructions For Installation And Use Manual

Page: 27 / 36

27
1 2 3
1
2
3 4
1
2
3 4
1
2
1
2
Only for:
1150DH, 1300H-DH-CL-CR-DC,
1600H-DH-CL-CR-DC, 1900H
5. Manual control (Double line burner)
Start the first burner as in the manual control of single line burner
To light up the 2nd burner, press
First you see the wave settings (page 33). or
Press a second time and you will see a “b0” or “b0”
Remark: If after a previous use of the fireplace, you turned it off in “b1” mode,
next ignition, burner 2 lights up. If, on the other hand, you have switched off the appliance in
mode “b0” the appliance will switch on only with the burner 1
If “b0” appears, press to “b1”, side burners 2 lights up.
If “b1” appaers, press to “b0” , side burners 2 will go out.
Choose a flame height from 1 to 15 by pressing or
To switch off the entire stove press
Not available for:
700H, 550V, 1000RD en 1300RD
To light up the side burners 2, press .
First you see the wave settings (page 30). or
Press a second time and you will see a “b0” or “b0”
If “b0” appears, press to “b1”, side burners 2 lights up.
If “b1” appaers, press to “b0” , side burners 2 will go out.
Choose a flame height from 1 to 15 by pressing or
To switch off the entire stove press
Remark: If after a previous use of the fireplace, you turned it off in “b1” mode,
next ignition, the burners 1,2 and 3 will light simultaneously. If, on the other hand, you
have switched off the appliance in mode “b0” the appliance will switch on only with the
burner 1
4. Manual control (Triple Line Burner)