M Design Luna Diamond Series, Instructions For Installation And Use Manual

Page: 26 / 36

26
1
2
12. Remote control (direct ingnition)
1
3. Manual control (Single line burner)
From the moment the burner is on, you can start with the
flame height control.
The screen will automatically show manual control ( flame
heigt control )
Press on until you see number 15.
This is the maximum flame height.
Choose a flame height from 1 to 15
by pressing or
For all appliances, except for:
850V, 1150V, 550DV en 850DV
Keep pressing the button
until 24:00 appears in the top left corner (1).
Press several times on
until you see “bnd” on the screen (2)
Press shortly on and
You see the temperature on the
screen. Your remote control is now
connected.
1. First use (Connect the remote control)
2. Ignite the fire
Press simultaneously on and
You hear the ionisationpen ticking.
The ticking lasts for about 15 sec.
At initial setup, it’s possible that the pilot flame doesn’t
ignite imidiatly because the pipes are not yet fully deflated.
You can try this up to 5 times before the unit will be placed
in safety. If this fails, pleas contact your installer.