36
Pads
To edit one of the Pads when in Preset Edit Mode, press a Pad. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel:
The pad will send its messages over this channel. Select the global channel (
Global
),
a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels (
Omni
).
Available Values:
Global, 1-16, Zone 1-4, Omni
Color 1:
Select the primary color that you want to assign to the pad.
Available Values:
Off “
OFF”
, Chartreuse
“CHAR.”
, Green
“GREEN”
, Aquamarine
“AQUA”
,
Cyan
“CYAN”
, Azure
“AZURE”
, Blue
“BLUE”
, Violet
“VIOLET”
, Magenta
“MAGENTA”
, Rose
“ROSE”
, Red
“RED”
, Orange
“ORANGE”
, Yellow
“YELLOW”
, White
“WHITE”
.
Color 2:
Select the secondary color that you want to assign to the pad.
Available Values:
Off “
OFF”
, Chartreuse
“CHAR.”
, Green
“GREEN”
, Aquamarine
“AQUA”
,
Cyan
“CYAN”
, Azure
“AZURE”
, Blue
“BLUE”
, Violet
“VIOLET”
, Magenta
“MAGENTA”
, Rose
“ROSE”
, Red
“RED”
, Orange
“ORANGE”
, Yellow
“YELLOW”
, White
“WHITE”
.
Mode “MODE”:
•
Note
“NOTE”:
The pad will send its MIDI messages using this Note number.
•
CC
“CC”:
The pad will send its MIDI messages using this CC number.
•
CC Cycle
“CC CYCLE”:
The pad will send the value with this CC number when you press
it, one at a time, cycling through them with each press.
•
CC Inc/Dec
“CC INC/DC”:
The pad will send the next (Increment) or previous
(Decrement) value number in the range of values when you press it.
•
Program
“PROGRAM”:
The pad will send this program number when you press it.
•
Program Cycle
“PRG CYCL”:
The pad will send the value with this Program number
when you press it, one at a time, cycling through them with each press.
•
Program Inc/Dec
“PG IN/DC”:
The pad will send the next (Increment) or previous
(Decrement) program number in the range of programs when you press it.
•
Zone
“ZONE”:
The pad will activate or deactivate the selected Zones assigned to the
keybed.
When set to Note, these are the available parameters:
Note:
The pad will send its MIDI messages using this Note number.
Available Values:
C-2 – G8
Latch:
When set to Latch On, the pad will send one value when pressed and a different value
when pressed a second time, alternating between the two values with each press. When set to
Latch Off, the pads will send one value when pressed and one value when released.
Available Values:
On/Off
Note On:
When Latch is active, the pad will send the MIDI note number with this velocity when
you press it to turn it on.
Available Values:
0-127
