42
Encoder Press
To edit the press functionality of the Encoder when in Preset Edit Mode, press and hold the
SHIFT
button and press the
ENCODER
. You can scroll through the available parameter values
using the Encoder. Select what parameter you would like to edit by pressing the Encoder.
Channel:
The Encoder will send its messages over this channel. Select the global channel
(
Global
), a specific channel (
Channel 1
–
16
), a zone (
Zone
1
–
4
), or all channels (
Omni
).
Available Values:
Global, 1-16, Zone 1-4, Omni
Assign:
•
Same as DAW
“DAW”:
This assignment will match the message assigned to the Oxygen
Pro's current DAW selection's Encoder press.
•
CC:
When set to
CC
, the Encoder press will send standard MIDI CC messages to your
virtual instrument.
•
Program:
The Encoder will send its MIDI messages using the selected
Program
number
and
MSB
and
LSB
values.
When set to CC, these are the available parameters:
CC:
The Encoder will send its MIDI messages using this CC number.
Available Values:
0-127
Press:
The Encoder will send the MIDI CC number with this value when you press it.
Available Values:
0-127
Release:
The Encoder will send the MIDI CC number with this value when you release it.
Available Values:
0-127
When set to Program, these are the available parameters:
Program:
The Encoder will send this program number when you press it.
Available Values:
0-127
MSB:
The Encoder will send this Bank MSB (Most Significant Byte) number when you press it.
Available Values:
0-127
LSB:
The Encoder will send this Bank LSB (Least Significant Byte) number when you press it.
Available Values:
0-127
