of data entry slide. By pressing the MIDI/SELECT button and CC data key, and
then the required number, and finally the Enter key to finish. For example, if you
want to make Control Change 7 to a value of 123:
1) Press MIDI/SELECT button;
2) press CC No.;
3) choose 7 on numeric keypad;
4) press enter key to specify Control Change as 7;
5) press CC data key;
6) press number key 1, 2, and 3;
7) press enter key to specify value 123 then press MIDI/SELECT button to finish
this action.
Please note: After you press the enter key, the LED display will
show “—-“ to indicate that you pressed enter key and will not
disappear until you press MIDI/SELECT button to finish your
choice. After you press the cancel key, the LED display will show
blank to indicate that you pressed the cancel key, and will not
disappear until you press the MIDI/SELECT button to finish your
choice.
Program key:
Pressing the MIDI/SELECT button and the Program key, then
numeric keys, and finally the enter key, you can select any patch number between
1 and 128. For example, if you want to change voice to 67 (TenoSax). Pressing
MIDI/SELECT button and 67 on numeric keys then enter key and
MIDI/SELECT button again to finish this action.
Please note: after you press the enter key, the LED display will
show “—-“ to indicate that you pressed enter key and will not
disappear until you press MIDI/SELECT button to finish your
choice. After you press the cancel key, the LED display will show
blank to indicate that you pressed the cancel key, and will not
disappear until you press the MIDI/SELECT button to finish your
choice.
Part B. Rear Panel:
1
2
3
4
5
6
12
