57
Direct Dialing of Phone Calls (System Model
only)
1. If the phone number is not stored in the pre-
stored list of phone numbers, but the phone
number is known, it can be entered directly from
the keypad. Start by pressing the
*
. Then
enter the required number from the keypad.
Note:
The last number entered directly can be
recalled by first pressing
*
then the OPTION
button.
2. Press the PTT button: the radio performs the
necessary signaling to obtain a communication
channel. When the signaling is complete and the
radio is clear to transmit, turns on, turns off
and the channel access tone sounds. Line one
shows the called phone number. The message
*PHONE*
displays on line two. The radio then
automatically transmits the dialed number.
3. A telephone ring can be heard from the speaker.
When someone answers the phone, press the
PTT button and speak into the microphone.
Release the PTT button to listen to the individual
called. Unsuccessful interconnect signaling
returns the radio to the normal receive mode and
the number remains displayed until the special
call is cleared or the time-out expires or another
group or system is selected. Terminate a call by
pressing the CLEAR/MONITOR button.
