M/A-Com LPE-200 Operator'S Manual Download Page 30

Page: 30 / 102

SYSTEM/GROUP/CHANNEL SELECTION

System Selection

Several methods can be used to select a new

system.

METHOD 1: From knob: If system selection is

programmed to the SYSTEM/
GROUP/CHANNEL knob, select a
system by turning the SYSTEM/
GROUP/CHANNEL knob to the
desired system number position (1-
16). The display registers the new
system name on line one.

NOTE

: The radio is supplied with a

mechanical stop which can, if desired,
limit the number of positions
accessed. If the knob will not access
all positions, do not force it.

METHOD 2: From keypad: If system selection is

programmed as the primary function
of

and

, select a system by

pressing

, or

to scroll

through the system list. The display
registers the new system name on line
one.

METHOD 3: Direct Access: Press

to enter the

system select mode. Press the
numeric key which is mapped to the
desired system. Press

. The radio

will move to the selected system.

Summary of Contents for LPE-200







































































































Search results

Summary of Contents for LPE-200

Reviews:

Related manuals for LPE-200

Brands by name

Popular brands

M/A-Com LPE-200, Operator'S Manual

Search results

Summary of Contents for LPE-200

Reviews:

Related manuals for LPE-200

Brands by name

Popular brands