M/A-Com LPE-200 Operator'S Manual Download Page 25

Page: 25 / 102

Message

Name

Description

radio will automatically
shutdown.

RXEMER

Receive
Emergency

- Trunked mode only.

Indicates an emergency call
is being received. This
message will be flashing on
line two.

TXEMER

Transmit
Emergency

- Trunked mode only.

Indicates an emergency call
has been transmitted on
this radio. This message will
be flashing on line two.

VOL=31

Volume Level

- Indicates the current volume

level. The volume level
display ranges from OFF
(silent) to 31 (loudest).

WHC

Who Has
Called
(trunked
mode
only)

- ON - indicates an individual

call has been received, but
not responded to. The
indicator turns OFF if the
individual call mode is
entered, the system is
changed or the radio is
turned off and back on.

UNKNOWN

Unknown ID

- Trunked mode only.

Indicates an individual call is
being received by an
unknown radio ID.

Summary of Contents for LPE-200







































































































Search results

Summary of Contents for LPE-200

Reviews:

Related manuals for LPE-200

Brands by name

Popular brands

M/A-Com LPE-200, Operator'S Manual

Search results

Summary of Contents for LPE-200

Reviews:

Related manuals for LPE-200

Brands by name

Popular brands