Lynx Rave 800, Owner'S Manual

Page: 181 / 190

OPERATOR’S GUIDE 56
ENGLISH
Check that the air box is clean and dry and properly reinstall the filter.
CAUTION!
Snowmobile engines have been calibrated with the filter installed. Operating the snow-
mobile without it may cause engine damage.
Bulb replacement
Always check light operation after bulb replacement.
Headlight
CAUTION!
Never touch glass portion of an halogen bulb with bare fingers, it shortens its operating
life. If glass is touched, clean it with isopropyl alcohol which will not leave a film on the
bulb.
Some models
If headlamp is burnt , tilt hood. Unplug connector from headlamp. Remove protector cap
and unfasten bulb retainer clips. Detach bulb and replace.
Some models
New bulb installing: Open the hood,
remove the connector from headlamp
and turn the headlamp off, change
new headlamp.
Instrument(s)
Bulb socket is always behind the instrument under a black rubber boot. Pull rubber and
socket to expose bulb. Pull bulb out of socket.
Taillight
If tailllight bulb is burnt, expose the bulb by removing the red plastic lens. To remove,
unscrew the 2 lens.
1. Locking ring