Lynx Rave 800, Owner'S Manual

Page: 173 / 190

OPERATOR’S GUIDE 48
ENGLISH
CAUTION!
Do not force or use tools to pry the belt into place, as this could cut or break the cords in
the belt.
Reposition and lock driven pulley support. On models so equipped, remove belt installer.
Reinstall belt guard.
Drive chain tension
Models with chaincase
Remove hair pin.
Fully tighten tensioner adjustment screw by hand, then back off only far enough for hair pin
to engage in locking hole.
1. Hair pin
2. Adjustment screw
TRA drive pulley adjustment
Some models
The drive pulley is factory calibrated to transmit maximum engine power at a predefined
RPM. Refer to SPECIFICATIONS at the end of this guide.
Factors such as ambient temperature, altitude or surface condition may vary this critical
engine RPM thus affecting snowmobile efficiency.
WARNING!
Do not try to make adjustment by yourself. Refer to authorized Lynx service shop.