OPERATOR’S GUIDE
45
ENGLISH
MAINTENANCE
Belt guard removal and installation
Remove tether cord cap.
Open hood. Remove guard retaining pins and lift off the guard.
Some models
Remove tether cord cap. Open hood.
Open retainer to release pin the lift belt guard. Proceed one side at a time.
Some models
Remove tether cord cap. Open hood.
Pull out clip the, open pin retainer. Remove belt guard.
1. Retaining pins
Some models
Belt guard is purposely made slightly oversize to maintain tension on their pins and retainer
preventing undue noise and vibration. It is important that this tension be maintained when
reinstalling.
Drive belt removal and installation
All models
Removal and installation of drive belt is easier when driven pulley is held with brake so that
it can not rotate. Apply parking brake, for this purpose.
Open hood and remove belt guard.
Summary of Contents for Rave 800
