5
Power ON / OFF
Switching ON
When powered OFF, pressing the power button for 1 second or longer
will power up the unit and it will be fully operational within 5 seconds.
The unit will resume with the last used settings before the unit was shut
down.
(Current settings are automatically stored on shutdown)
The unit will power up automatically when connected
to a USB-DCP
charger.
(The unit can be manually switched OFF to facilitate faster charging)
Switching OFF
There are two ways to manually switch the unit off.
• When the device is powered ON, tapping POWER OFF on the home
screen will ask for a confirmation before switching off.
• When the device is powered ON, pressing and holding the POWER
button for 5 seconds or longer will also switch off the unit.
Automatic Shutdown
With no user activity (touch screen use) the unit will automatically shut
down after a given time period to preserve battery life.
This can be preset to 5, 10 or 20 minutes or NEVER. Refer to the “Battery
Timeout” settings in this guide to preset this function.
Note
: While being charged the module will deactivate the automatic shutdown.
Navigation:
HOME > SETTINGS > BATTERY TIMEOUT
(make selection)
SDI Outputs
SD-SDI (270Mbit) and HD-SDI (1.5Gbit) SDI Operation
When the Testor lite 3G is configured for an SDTV video format (270Mbit)
or an HDTV (1.5Gbit) video format, each SDI output is always the same
video format but can have a different pattern assigned. Each SDI output
can also have different embedded audio and the overlays switched ON or
OFF independently (overlays are the same for both outputs)
