Technical Specifications
Power
I
nternal rechargeable battery. Full charge provides approx. 4 Hours continuous use.
External power / charge is provided via the USB port.
Note: USB port is also used for firmware updates
When connected to
a standard USB 2.0 port the Testor lite 3G will draw 500mA (max) to charge battery.
(if the unit is powered while connected to a USB 2.0 port then it will use the internal battery
and is not
charging)
Charge time 360 minutes approx. (from empty) when connected to standard USB 2.0 port (i.e. computer)
with Testor Lite 3G switched off.
If connected to the USB-DCP power supply (included) then the unit can be powered and charged simulta
-
neously. (1.5A).Charge times (from empty): 100 minutes approx. with unit switched off
180 minutes approx. with unit switched on
The battery has an internal temperature sensor and will stop charging if the battery temperature is too
high. This can also happen if the unit is charged and operated at the same time.
Physical Size
(including connectors):
130 x 77 x 23mm (5.12 x 3.03 x 0.91 inches)
Weight:
250g (8.82 oz)
Ambient Temperature:
5-40ºC (41-104ºF)
Humidity:
90% non condensing
Max. Operation Height over sea level:
2000m (6562 ft.)
Options
Protect your Testor lite 3G with a durable protective
cloth case / pouch. This incorporates a transparent
window to view and operate the touch screen, as
well as a belt clip. Part
PTG-CASE
Testor
| lite
3G
™
LYNX
Technik
AG
|
Broadcast Television Equipment
Please visit our website for the latest product information and
news
www.lynx-technik.com
All LYNX Technik AG products are designed and manufactured in Germany
The contents of this guide and specifications are subject to change without prior notice
CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for
products sold within the European Economic Area (EEA)
Please read Safety Instructions (seperate document)
