greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 54 of 57
Analog - Digital Configuration
The audio inputs and outputs can be configured as analog or digital interfaces. When
configured as analog interfaces, a maximum of four analog audio inputs/channels and four
analog audio outputs/channels are available.
When configured as digital interfaces, a maximum of four AES inputs (eight audio
channels) and four AES outputs (eight audio channels) are available.
When set to analog, the full-scale level adjustments are added to the inputs and outputs.
General Purpose Interface (GPI)
The greenMachine titan provides four inputs and four outputs General Purpose Interfaces
(GPI) via an RJ45 connector. The pinning of the RJ45 connector is according to TIA/EIA
568-B. The pin layout is given in the table below:
No GPI functions are implemented yet. Will be added in future versions.
Power Supply Connectors DC1 and DC2 (PSU)
The greenMachine titan is equipped with two power supply connectors (DC1 and DC2)
for primary and secondary power supply. Loop connecting two greenMachines is to be
avoided. Do not connect and disconnect DC plugs under load. Disconnect AC power
first. Refrain from high mating cycle counts.
Pin
Number
Connection
1
GND
2
GPI IN 2
3
GPI OUT 2
4
GPI OUT 1
5
GPI OUT 1
6
GPI OUT 2
7
GND
8
GPI IN 1
Pin
Number
Connection
1
GND
2
GPI IN 4
3
GPI OUT 4
4
GPI OUT 3
5
GPI OUT 3
6
GPI OUT 4
7
GND
8
GPI IN 3
