greenMachine
®
titan Reference Manual - Rev 2.0
© 2019
LYNX
Technik
AG
Page 20 of 57
System Settings
The
System
menu contains all setting and monitoring possibilities that are not directly
related to the processing.
Deploying Constellations with the local Control Panel
The front control panel allows the complete configuration of the module including the
deployment of new constellations.
Deployment of new constellations can be done in the
System
menu. To select the
System
menu, just press the button next right to the display. Then select the
General
menu.
Note: The areas on the left and right side of the display show the active menu items. Turning the
rotary push encoder will navigate between these different menu items. The inverted menu item (i.e.
dark gray with white text) is currently selected.
There are two different shapes for the menu items. The square boxes are menus containing at least
one additional menu level. When selected, the middle part of the display will show a preview of
what settings and/or menus are available within this menu. Pressing the encoder will enter the
selected menu. Pressing the
Back
button below the encoder will return to the higher menu level.
Please select the constellation you would like to deploy form the parameter list in the
display and press the rotary button.
Note: The hexagon shaped items are parameters.
When one of these menu items is selected, the
middle area of the display will show the type of
parameter and the current setting.
To edit the parameter, press the encoder. When in
edit mode, turn the encoder. To exit the edit mode,
press either the encoder or the
Back
button.
