Lynx C DX 5624 Reference Manual Download Page 29

         C DX 5624 Reference Manual. Rev 2.0 

 

Page 29 of 29 

Service 

Parts List 

 

Due to the very dense design and high level of integration there the module is not user 
serviceable. Please contact LYNX for repairs or to request an exchange unit. 
 
There is one consumable part used on this module which is the cooling fan. A service kit 
is available to exchange the fan.  Ordering information below. 
 
Part type:   

Cooling Fan Service Kit Series 5000 CardModules 

 

Technical Support 

 

If you are experiencing problems, or have questions please contact your local distributor 
for further assistance. 
 
Technical support is also available from our website. 
 
Please do not return products to LYNX without an RMA. Please contact your authorized 
dealer or reseller for more details. 
 
More detailed product information and product updates may be available on our web site:  

 

www.lynx-technik.com 

 

Contact Information 

 

Please contact your local distributor; this is your local and fastest method for obtaining 
support and sales information. 
 
LYNX Technik can be contacted directly using the information below. 
 

Address

 

 

LYNX Technik AG 
Brunnenweg 3 
D-64331 Weiterstadt 
Germany. 

 
 

Website

 

 

www.lynx-technik.com

  

 

E-Mail

   

 

[email protected]

  

 
LYNX Technik manufactures a complete range of high quality modular products for 
broadcast and Professional markets, please contact your local representative or visit our 
web site for more product information. 
 

 

Summary of Contents for C DX 5624






























Reviews: