C DX 5624 Reference Manual. Rev 2.0
Special Functions
These functions are for specialized use only and should be left set to the factory defaults
unless you are sure you need to adjust these parameters.
Luminance Delay
– This allows for the delay of the Luminance signal relative to sync
(and Chroma) by the time period specified (default 0)
Chrominance Delay
– This allows for the delay of the Chrominance signal relative to
sync (and Luma) by the time period specified (default 0)
Double Buffering
– This is double buffers the video signal so that any changes made to
the module settings over the remote Ic2 interface occurs in the vertical blanking interval.
Analog Video Gain Tab
This GUI screen provides access to the internal video processing amplifier where gain
levels can be adjusted and set. Default is a null setting for all adjustments.
Note.
The buttons at the bottom of each slider will return the settings to the
factory preset null setting.
Options
Y level
– The Y level can be changed, which depends on the application. Possible
settings are:
•
SMPTE
(default)
•
BETACAM
UV Level
– The UV levels used can be preset which depends on the application.
Possible settings are
•
700mv
•
1000mv
•
648mv
Page 25 of 29
