C DX 5624 Reference Manual. Rev 2.0
Control System GUI
All LYNX CardModules support a computer interface which allows setting the modules
parameters using a simple GUI interface. Access to all standard features (and in some
cases) extended features is possible using this interface.
Access to the GUI requires the use of the optional LYNX control system
Note.
Any settings made using the control system overrides any local settings
made on the module. All settings are stored in internal flash ram and will survive
power cycles and long term storage.
The GUI screenshots below show the settings and adjustments possible for the
C DX 5624 CardModule.
The above screenshot shows the complete module GUI. The Device info area contains
information about the module including name and firmware revision. If used as part of a
larger system (using the LYNX central control system) the modules position and physical
location is displayed above the “locate” button.
Note.
The Locate function us a tool used to quickly identify a module in larger
systems. Selecting “locate” will flash the module alarm LED yellow. (does not
effect module operation)
The first screen you see when the module is selected is the
Main
tab this is a graphical
representation of the modules function and signal flow (left to right). Clicking on
processing boxes where shown will link to other GUI screens with controls for these
specific functions.
Page 18 of 29
