C DX 5624 Reference Manual. Rev 2.0
Output Format
Use this drop down selection to configure the analog outputs. Selections are
•
3 x CVBS
•
1 x CVBS + YC
•
YUV
•
RGB
The “Add Pedestal” function is enabled when a NTSC is being provided and checking this
box will add a 7.5IRE Pedestal to the analog outputs.
NTSC Output Options
There are two check boxes provided which are for configuration of the video signal when
in NTSC (525) output mode.
Add pedestal (when selected) will add a 7.5IRE pedestal to the analog outputs.
PAL M will configure the NTSC outputs to the PAL M standard.
PAL Output Options
There is one selection possible when in PAL (625) mode. When selected this will format
the outputs into the PAL N video standard.
Luminance Output Filter
This drop down selection allows the selection of the Luminance filtering characteristics for
the analog to digital converter. Settings are listed below followed by the filter response
characteristics.
Extended Mode (Default)
•
Extended Mode (default)
•
Notch
Filter
•
Lowpass
•
CIF
Notch Filter (PAL)
Low Pass (PAL)
Page 22 of 29
