18
Initial Setup Procedure
Set up the TDAI-3400 integrated amplifier by following these steps:
1.
Connect the speakers to the Speaker Output connectors.
2.
Connect all external equipment, audio and video, mains power, etc. to the TDAI-3400.
3.
If possible, connect the TDAI-3400 to your local network with an ethernet cable.
4.
Switch on the mains switch on the back of the TDAI-3400.
The TDAI-3400 will boot the internal computer and go into Stand-By.
5.
Switch on the TDAI-3400.
The TDAI-3400 will initially want to connect to your local network.
If connected by network cable (LAN) the TDAI-3400 will automatically connect and display the IP
network reference.
For using iPhone or iPad:
If no wired network is attached, the TDAI-3400 will want to connect via WIFI
– referring to “Apple Wi-Fi
Accessory Configuration
”.
1.
Open the Wi-Fi settings on your iPhone/iPad
– and you will find the TDAI-3400 under “Setup New
Airplay Speaker
”.
2.
Change the device name of your TDAI-3400, press Next, and the TDAI-3400 will copy the Wi-Fi
settings from your phone
For using Android phone or tablet:
The TDAI-3400 will establish a soft access point. Type 192.168.110.42 in your browser to access the manual
Wi-Fi setup.
Without iPhone/iPad you can manually enter all data or use the WPS function to pair the TDAI-3400 with
your Wi-Fi router. (Select WPS and go and press the WPS button on your router)
You can now choose to continue the setup via the display or via web interface (see next page)
Access the speaker setup guide and verify your setup by selecting your speaker types
Settings can be modified later under the Output Menu.
Access the RoomPerfect™ setup guide and calibrate your speaker setup. See later section.
If you at any point do not want to continue doing setup or calibration, then exit the menu by a long push on
the menu button. The TDAI-3400 will now have a basic stereo setup, and you can play music.
