S80 Version 4.92
November 2014
Page 31 of 61
5.5.4.1.3
Active Timeout
Adjusts the time a glider symbol remains on the map after it has last been seen by the
Flarm.
5.5.4.1.4
Inactive Timeout
Adjusts the time of inactive gliders on the Flarm target list. Inactive gliders are gliders,
where the Flarm signal has been lost after Active timeout. The targets became inactive
and remain only on the Flarm target list for this time.
5.5.4.1.5
Draw Line to selected Target
Checkbox to enable or disable a line drawn to a selected Flarm target or not.
5.5.4.1.6
Draw History
Select if a trail is drawn behind Flarm targets to show where the targets have been
5.5.4.1.7
Plane icon size
To adjust the pixel size of Flarm targets.
5.5.4.2
Graphics – Airsp. & Tsk.
In this dialogue you can define the airspace map presentation. Check the
Show airspace
item to enable airspace displays in navigational pages. If this item is unchecked no airspace
will be displayed.
If the
Show inactive zones
option is checked then airspace zones with proximity warning
switched off will be shown. Use
Show only airspace below
to eliminate airspace which is
going to be too high for the day. For example, if the forecasted cloud base is to be 1500 m,
set this value to 1600 m and your screen will be much more readable.
