S80 Version 4.92
November 2014
Page 18 of 61
To
Select
a waypoint, use the bottom rotary knob to highlight the select option and
then press once. This will open the Waypoint list
The Waypoint can be selected from the alphabetical list of waypoints. (See uploading
files section
Error! Reference source not found.
). Rotating the bottom rotary Knob
moves you through the waypoint list in alphabetical order, clockwise increasing the
value, Anti Clockwise, decreasing the value. To select the first letter of the desired
waypoint, press the Enter button (bottom of the three buttons) this moves the cursor
to the second letter. Rotate the bottom rotary knob until the second letter of the
required Waypoint is highlighted and then press Enter. Repeat the process until the
required waypoint is the only selection available. You can then either press the enter
button or press the bottom rotary Knob to select the Waypoint. The screen will then
change back to the navigation page and show a line to the Waypoint, Waypoint name
and relative bearing.
5.3.1.1
Navboxes Option
Using the Quick access menu and select Navboxes allows you to move the position
of the three Navboxes from the bottom of the screen to the right hand side of the
screen by rotating the bottom rotary knob.
