LXE VX6, Reference Manual

Page: 93 / 168

Control Panel Options 81
E-EQ-VX6RG-A VX6 Reference Guide
Scanner
Access: Start | Settings | Control Panel | Scanner
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
Factory Default Settings
Main
Port 1
Enabled
Port 2 Disabled
Power Port 1 while asleep N/A
Send key messages WEDGE Enabled
COM Ports COM1 COM3
2
Baud Rate 9600 9600
Parity None None
Stop Bits 1 1
Data Bits 8 8
Power on Pin 9 On Off
Note: ActiveSync will not work over a COM port if that COM port is assigned to Port 1 or Port
2 in the Scanner applet as a scanner input. For example, if COM1 is being used by the
scanner, COM1 can’t be used by any other program.
Main
Figure 4-23 Scanner Properties / Main Tab
Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.
If “Send Key Messages …” is checked any data scan is converted to keystrokes and sent to the
active window. When this box is not checked, the application will need to use the set of LXE
Scanner APIs to retrieve the data from the scanner driver. Note that this latter method is
significantly faster than using “Wedge”.
2
The COM3 port is labeled “COM2/3”.