Connect Power Supply to Vehicle
33
E-EQ-MX7DKRG-C
MX7 Cradle Reference Guide
Connect Power Supply to Vehicle
Mounting hardware and tools are not supplied by LXE.
The adapter should be mounted in an area in the vehicle where it:
•
Does not obstruct the vehicle operator's vision or safe vehicle operation.
•
Will be protected from rain or inclement weather.
•
Will be protected from extremely high concentrations of dust or wind-blown debris.
Vehicle 12V Bare Wire Adapter
Part Number: 9000A079CBL12ML3
Caution:
For proper and safe installation, the input power cable must be connected to a
fused circuit on the vehicle. This fused circuit requires a 10 Amp maximum
time delay (slow blow) high interrupting rating fuse. If the supply connection
is made directly to the battery, the fuse should be installed in the positive lead
within 5 inches of the battery positive (+) terminal. Note: For North America,
a UL Listed fuse is to be used.
Caution:
For installation by trained service personnel only.
Warning:
Risk of ignition or explosion. Explosive gas mixture may be vented from
battery. Work only in well ventilated area. Avoid creating arcs and sparks at
battery terminals.
GND
+
-
3
4
5
6
1
2
1. To Vehicle Battery
2. To
Vehicle
Mounted Device
3. Green
(GND)
4. Brown
(DC+)
5. Blue
(DC-)
6. 12
VDC
Figure 25 Vehicle Power Connection Cable (Fuse Not Shown)