LXE MX3, User Manual

Page: 8 / 64

2 Overview
MX3-RFID User’s Guide E-EQ-MX3RFIDOGWW-A
Features/Options for the MX3X Family
Feature MX3-RFID MX3X MX3P
CE .NET 4.2 Operating System x x x
Main Battery Pack x x x
AC/DC Power Supply x x x
Color and Touch Panel x x x
SE 923 Laser Scanner (prior to July 2006) x x -
SE 955 Laser Scanner (after July 2006) x x -
RFID Module Enclosure x - x
RFID Tag Reader x - -
Power/Communication Cradles - x -
Passive Vehicle Cradle x - x
Voice Compatible - x -
ActiveSync specific cables x x x
Hip-Flip Accessory - x -
IP 66 Compliant - x -
IP 65 Compliant x - x
Note: MX3-RFID mobile devices are available in the USA only.
Note: The RFID Module has a hand strap. Location and attach points are different from the
standard MX3X hand strap. MX3-RFID devices are shipped with a hand strap already
installed.
Related Manuals
The “MX3-RFID Reference Guide” contains MX3-RFID technical information and instruction.
An abbreviated user’s guide (LXEbook – MX3-RFID User’s Guide) is available for download to
the mobile device from the LXE Manuals CD or the LXE ServicePass website.
Please refer to the “MX3 Cradle Reference Guide” for technical information relating to the MX3-
RFID Passive Vehicle Mount cradle.
If you need to set up the integrated SE923 or SE955 scanner barcode reading parameters , please
refer to the “Integrated Scanner Programming Guide” on the LXE Manuals CD or the LXE
ServicePass website. The SE923 scanner was replaced with the SE955 scanner in July 2006.
Note: Always store unused devices with a fully charged main battery installed. LXE
recommends an in-use mobile device be frequently connected to an external power
source to retain optimum power levels in the main battery and the backup battery. After
the backup battery and main battery are depleted (dead), then when a fully charged main
battery is installed, and the device powered On again, the mobile device reverts to the
last saved default (or factory) values. Follow the steps in “Getting Started”.