2
ENGLISH
Specifications
Power supply:
230 V~, 50 Hz
Effect:
2000 W
Temperature:
350 °C or 550 °C
Cable length:
2 m
Max air flow:
500 L/min
Weight:
705 g
IP class:
IP20
Use
Plug in the power cable and turn on the heat gun by flicking the switch to “I” or “II”. The
“I” mode heats up to 350 °C and the "II" mode heats up to 550 °C. Turn off the heat gun
by flicking the switch to “0”.
Accessories
The heat gun comes with 4 different accessories that can be used for different actions.
Removing paint
: Keep the nozzle at least 25 mm away from the surface. Be extra careful
when removing paint from window frames. Allow the paint to soften and remove using a
suitable scraper. Don’t overheat the paint, stop heating if it blackens or smoke appears.
Be careful to not let anything drop into the outlet nozzle.
Removing paint/varnish from windows
: Use the scraper nozzle (4), a spatula and brush
can also be of good use.
Pipe defrosting
: Use the reflector nozzle (1) and aim it at the frozen pipe. Move the heat
gun along the pipe evenly. Be careful so you don’t overheat the area behind the pipe. Do
not attempt to defrost PVC pipes as the heat may permanently damage the pipe.
1
2
3
4